Evaluating the Impact of Cl2•- Generation on Antibiotic-Resistance Contamination Removal via UV/Peroxydisulfate.

The removal of antibiotic-resistant bacteria (ARB) and antibiotic-resistance genes (ARGs) using sulfate anion radical (SO4•-)-based advanced oxidation processes has gained considerable attention recently. However, immense uncertainties persist in technology transfer. Particularly, the impact of dichlorine radical (Cl2•-) generation during SO4•--mediated disinfection on ARB/ARGs removal remains unclear, despite the Cl2•- concentration reaching levels notably higher than those of SO4•- in certain SO4•--based procedures applied to secondary effluents, hospital wastewaters, and marine waters. The experimental results of this study reveal a detrimental effect on the disinfection efficiency of tetracycline-resistant Escherichia coli (Tc-ARB) during SO4•--mediated treatment owing to Cl2•- generation. Through a comparative investigation of the distinct inactivation mechanisms of Tc-ARB in the Cl2•-- and SO4•--mediated disinfection processes, encompassing various perspectives, we confirm that Cl2•- is less effective in inducing cellular structural damage, perturbing cellular metabolic activity, disrupting antioxidant enzyme system, damaging genetic material, and inducing the viable but nonculturable state. Consequently, this diminishes the disinfection efficiency of SO4•--mediated treatment owing to Cl2•- generation. Importantly, the results indicate that Cl2•- generation increases the potential risk associated with the dark reactivation of Tc-ARB and the vertical gene transfer process of tetracycline-resistant genes following SO4•--mediated disinfection. This study underscores the undesired role of Cl2•- for ARB/ARGs removal during the SO4•--mediated disinfection process.

Recent Advances in Black Phosphorous-Based Photocatalysts for Degradation of Emerging Contaminants.

The recalcitrant nature of emerging contaminants (ECs) in aquatic environments necessitates the development of effective strategies for their remediation, given the considerable impacts they pose on both human health and the delicate balance of the ecosystem. Semiconductor-based photocatalytic technology is recognized for its dual benefits in effectively addressing both ECs and energy-related challenges simultaneously. Among the plethora of photocatalysts, black phosphorus (BP) stands as a promising nonmetallic candidate, offering a host of advantages including its tunable direct band gap, broad-spectrum light absorption capabilities, and exceptional charge mobility. Nevertheless, pristine BP frequently underperforms, primarily due to issues related to its limited ambient stability and the rapid recombination of photogenerated electron-hole pairs. To overcome these challenges, substantial research efforts have been devoted to the creation of BP-based photocatalysts in recent years. However, there is a noticeable absence of reviews regarding the advancement of BP-based materials for the degradation of ECs in aqueous solutions. Therefore, to fill this gap, a comprehensive review is undertaken. In this review, we first present an in-depth examination of the fabrication processes for bulk BP and BP nanosheets (BPNS). The review conducts a thorough analysis and comparison of the merits and limitations inherent in each method, thereby delineating the most auspicious avenues for future research. Then, in line with the pathways followed by photogenerated electron-hole pairs at the interface, BP-based photocatalysts are systematically categorized into heterojunctions (Type I, Type II, Z-scheme, and S-scheme) and hybrids, and their photocatalytic performances against various ECs and the corresponding degradation mechanisms are comprehensively summarized. Finally, this review presents personal insights into the prospective avenues for advancing the field of BP-based photocatalysts for ECs remediation.

The involvement of PDIA2 gene in the progression of renal cell carcinoma is potentially through regulation of JNK signaling pathway

Renal cell carcinoma (RCC) with poor prognosis and high incidence rate is a common malignant disease. Current therapies could bring little benefit for the patients with advanced-stage RCC. PDIA2 is an isomerase responsible for protein folding and its role in cancer including RCC is under investigation. In this study, we found that PDIA2 was expressed much higher in RCC tissues than the control but the methylation level of PDIA2 promoter was lower based on the TCGA data. Patients with higher PDIA2 expression exerted worse survival. In clinical specimen, PDIA2 expression was correlated to patients’ clinical factors such as TNM stage (I/II vs III/IV, p = 0.025) and tumor size (≤ 7 cm vs > 7 cm, p = 0.004). Moreover, K-M analysis showed that PDIA2 was associated with patients’ survival in RCC. PDIA2 was expressed much higher in cancer cells A498 than 786-O than that in 293 T cells. After PDIA2 was knocked down, cell proliferation, migration and invasion was potently inhibited. But cell apoptotic rate increased reversely. Furthermore, the efficacy of Sunitinib on RCC cells was strengthened after PDIA2 knockdown. In addition, knockdown of PDIA2 gene leaded to downregulation of levels of JNK1/2, phosphorylated JNK1/2, c-JUN, and Stat3. But this inhibition was partially released when JNK1/2 was overexpressed. In consistent, cell proliferation was also partially recovered. In summary, PDIA2 plays important role in progression of RCC and JNK signaling pathway might be regulated by PDIA2. This study suggests PDIA2 as a candidate target for therapy of RCC (AU)

Recent Developments in Semiconductor-Based Photocatalytic Degradation of Antiviral Drug Pollutants.

The prevalence of antiviral drugs (ATVs) has seen a substantial increase in response to the COVID-19 pandemic, leading to heightened concentrations of these pharmaceuticals in wastewater systems. The hydrophilic nature of ATVs has been identified as a significant factor contributing to the low degradation efficiency observed in wastewater treatment plants. This characteristic often necessitates the implementation of additional treatment steps to achieve the complete degradation of ATVs. Semiconductor-based photocatalysis has garnered considerable attention due to its promising potential in achieving efficient degradation rates and subsequent mineralization of pollutants, leveraging the inexhaustible energy of sunlight. However, in recent years, there have been few comprehensive reports that have thoroughly summarized and analyzed the application of photocatalysis for the removal of ATVs. This review commences by summarizing the types and occurrence of ATVs. Furthermore, it places a significant emphasis on delivering a comprehensive summary and analysis of the characteristics pertaining to the photocatalytic elimination of ATVs, utilizing semiconductor photocatalysts such as metal oxides, doped metal oxides, and heterojunctions. Ultimately, the review sheds light on the identified research gaps and key concerns, offering invaluable insights to steer future investigations in this field.

The involvement of PDIA2 gene in the progression of renal cell carcinoma is potentially through regulation of JNK signaling pathway.

Renal cell carcinoma (RCC) with poor prognosis and high incidence rate is a common malignant disease. Current therapies could bring little benefit for the patients with advanced-stage RCC. PDIA2 is an isomerase responsible for protein folding and its role in cancer including RCC is under investigation. In this study, we found that PDIA2 was expressed much higher in RCC tissues than the control but the methylation level of PDIA2 promoter was lower based on the TCGA data. Patients with higher PDIA2 expression exerted worse survival. In clinical specimen, PDIA2 expression was correlated to patients' clinical factors such as TNM stage (I/II vs III/IV, p = 0.025) and tumor size (≤ 7 cm vs > 7 cm, p = 0.004). Moreover, K-M analysis showed that PDIA2 was associated with patients' survival in RCC. PDIA2 was expressed much higher in cancer cells A498 than 786-O than that in 293 T cells. After PDIA2 was knocked down, cell proliferation, migration and invasion was potently inhibited. But cell apoptotic rate increased reversely. Furthermore, the efficacy of Sunitinib on RCC cells was strengthened after PDIA2 knockdown. In addition, knockdown of PDIA2 gene leaded to downregulation of levels of JNK1/2, phosphorylated JNK1/2, c-JUN, and Stat3. But this inhibition was partially released when JNK1/2 was overexpressed. In consistent, cell proliferation was also partially recovered. In summary, PDIA2 plays important role in progression of RCC and JNK signaling pathway might be regulated by PDIA2. This study suggests PDIA2 as a candidate target for therapy of RCC.

Preparation of Alkali Activated Cementitious Material by Upgraded Fly Ash from MSW Incineration.

Utilization of municipal solid waste incineration fly ash (MSWI-FA) can avoid land occupation and environmental risks of landfill. In this paper, MSWI-FA was used to prepare alkali activated cementitious materials (AACMs) after two-step pretreatment. The ash calcination at 450 °C removed 93% of dioxins. The alkali washing with 0.2 g NaOH/g ash removed 89% of chlorine and retained almost 100% of calcium. The initial setting time of AACMs was too short to detect for 20% of MSWI-FA addition, and the prepared block had extensive cracks and expansion for CaClOH and CaSO4 inside. Alkaline washing pretreatment increased the initial setting time by longer than 3 min with 30% ash addition and eliminated the cracks and expansion. The significance of the factors for compressive strength followed the modulus of alkali activator > silica fume amount > alkaline washing MSWI fly ash (AW-MSWI-FA) amount. When the activator modulus was 1.2, 1.4 and 1.6, the blocks with 30% of AW-MSWI-FA had a compressive strength of up to 36.73, 32.61 and 16.06 MPa, meeting MU15 grade. The leaching test shows that these AACM blocks were not hazardous waste and almost no Zn, Cu, Cd, Pb, Ba, Ni, Be and Ag were released in the leaching solution.

Photocatalytic degradation of COVID-19 related drug arbidol hydrochloride by Ti3C2 MXene/supramolecular g-C3N4 Schottky junction photocatalyst.

Because of the current COVID-19 outbreak all over the world, the problem of antiviral drugs entering water has become increasingly serious. Arbidol hydrochloride (ABLH) is one of the most widely used drugs against COVID-19, which has been detected in sewage treatment plant sediments after the COVID-19 outbreak. However, there has been no report on the degradation of ABLH. In order to remove ABLH we prepared a novel photocatalyst composed of Ti3C2 MXene and supramolecular g-C3N4 (TiC/SCN) via a simple method. The properties of the material were studied by a series of characterizations (SEM, TEM, EDS, XRD, FTIR, UV-vis, DRS, XPS, TPC, PL, EIS and UPS), indicating the successful preparation of TiC/SCN. Results show that 99% of ABLH was removed within 150 min under visible light illumination by the 0.5TiC/SCN (containing 0.5% of TiC). The performance of 0.5TiC/SCN was about 2.66 times that of SCN resulting from the formation of Schottky junction. Furthermore, under real sunlight illumination, 99.2% of ABLH could be removed by 0.5TiC/SCN within 120 min, which was better than that of commercial P25 TiO2. The pH, anions (NO3- and SO42-) and dissolved organic matter (fulvic acid) could significantly affect the ABLH degradation. Moreover, three possible degradation pathways of ABLH were proposed, and the toxicities of the corresponding by-products were less toxic than ABLH. Meanwhile, findings showed that the superoxide radicals played a major role in the photocatalytic degradation of ABLH by 0.5TiC/SCN. This study provides a well understanding of the mechanism of ABLH degradation and provides a valuable reference for the treatment of ABLH in water.

Numerical Study on the Tensile Performance of Headed Stud Shear Connectors with Head-Sectional Damage.

An extensive numerical study was carried out due to the concern that head-sectional damage caused by corrosion poses a threat to the tensile performance of headed stud connectors. Three-dimensional finite element models of pull-out tests were established, with both material and geometric nonlinearities being considered. In particular, the concrete weak region due to bleeding was simulated. The simulation method was verified by the results of pull-out tests on two connectors with different damage degrees. Tensile performance of headed stud shear connectors of various shaft diameters (ds = 10 to 25 mm) with various damage degrees (up to 50%) was simulated. It was observed that the connector with a high damage degree exhibited low capacity and a failure closer to pull-out failure than concrete cone breakout failure. Based on the numerical results, reduction factors for quantitatively assessing the influence of head-sectional damage degree on the loading capacity and stiffness of connectors were proposed. With reference to the Concrete Capacity method, the reduction in tensile capacity of connectors with head-sectional damage was found to be caused by the decrease in the projected area of the concrete cone due to the reduction in head diameter, concrete cone angle, and embedment depth. Meanwhile, numerical results showed that the stiffness of a connector at a high embedment depth or in high strength concrete was more sensitive to head-sectional damage. It was also found that the elastic modulus of the weak region significantly affected the stiffness of connectors, while the influence of its thickness on the capacity and stiffness was insignificant.

Preparation of metal-free BP/CN photocatalyst with enhanced ability for photocatalytic tetracycline degradation.

The successful application of photocatalysis in practical water treatment opreations relies greatly on the development of highly efficient, stable and low-cost photocatalysts. The low-cost metal-free photocatalyst made up of black phosphorus (BP) and graphitic carbon nitride (CN) was successfully constructed and firstly used for the photocatalytic treatment of antibiotic contaminants in this work. Compared with bare CN, the BP/CN photocatalyst exhibited the enhanced photocatalytic performance for tetracycline hydrochloride (HTC) degradation, that 99% of HTC was removed by 6BP/CN (doping amount of BP was 6%) within 30 min under the simulated visible-light irradiation. The efficiency was even comparable to those of some high-efficiency photocatalysts recently-reported such as Fe0@POCN, CuInS2/Bi2MoO6 and Cu2O@HKUST-1. Under natural sunlight illumination, the determined apparent rate constant for degradation of HTC by BP/CN was 2.7 times as that by P25 TiO2. The experimental results indicated that loading BP on CN could enhance the separation of charge carriers and promote the ability of light absorption for visible-light, thus leading to a greater catalytic activity. Meanwhile, the influences of different operating variables (pH, water, ion and HTC concentration) on HTC degradation were studied in detail. Furthermore, the degradation pathway of HTC was also proposed. In addition, the photocatalytic activity of the BP/CN for production of hydrogen peroxide (H2O2) was also studied, which could reach up to 501.04 µmol g-1h-1. It is anticipated that BP/CN photocatalyst could be used for practical water treatment.

Visible-light-driven photocatalytic disinfection by S-scheme α-Fe2O3/g-C3N4 heterojunction: Bactericidal performance and mechanism insight.

High-performance photocatalytic applications require to develop heterostructures between two semiconductors with matched band energy levels to facilitate charge-carrier separation. The S-scheme photocatalytic system has great potential to be explored, in terms of the improvement of charge separation, however, small efforts have been made in photocatalytic disinfection application. In this study, a non-toxic and low-cost S-scheme photocatalytic system composed of α-Fe2O3 and g-C3N4 was fabricated by in-suit production of g-C3N4 and firstly applied into water disinfection. The α-Fe2O3/g-C3N4 junction demonstrated an enhanced activity for photocatalytic bacterial inactivation, with the complete inactivation of 7 log10 cfu·mL-1 of Escherichia coli K-12 cells within 120 min under visible light irradiation. Its logarithmic bacterial inactivation efficiency was nearly 7 times better than that of single g-C3N4. The experimental results suggested that the effective prevention of charge-carrier recombination led to an improved generation of reactive oxygen species (ROSs), resulting in impressive disinfection performance. Moreover, the DNA gel electrophoresis experiments validated the reason for the irreversible death of bacteria, which was the leakage and destruction of chromosomal DNA. In addition, this S-scheme heterojunction also showed excellent photocatalytic disinfection performance in authentic water matrices (including tap water, secondary treated sewage effluent, and surface water) under visible light irradiation. Hence, the α-Fe2O3/g-C3N4 composite has great potential for sustainable and efficient photocatalytic disinfection applications.

Development of a metal-free black phosphorus/graphitic carbon nitride heterostructure for visible-light-driven degradation of indomethacin.

The development of affordable and efficient technologies for the removal of pharmaceuticals and personal care products (PPCPs) from water has recently been the subject of extensive attention. In this study, a black phosphorus/graphitic carbon nitride (BP-g-C3N4) heterostructure is fabricated as an extremely active metal-free photocatalyst via a newly-developed exfoliation strategy. The BP-g-C3N4 shows an 11 times better decomposition rate of a representative PPCPs-type pollutant, indomethacin (IDM), compared to the widely-used P25 TiO2 under real-sunlight illumination. Also, its visible-light activity is even better than that of the best photocatalysts previously developed, but only consumes 1/10-1/4 of the catalyst. The results show that BP performs a cocatalyst-like behavior to catalyze the generation of reactive oxygen species, thus speeding up the decomposition of IDM. In addition, the BP-g-C3N4 photocatalyst also exhibits excellent IDM removal efficiency in authentic water matrices (tap water, surface water, and secondarily treated sewage effluent). Large-scale application demonstration under natural sunlight further reveals the practicality of BP-g-C3N4 for real-world water treatment operations. Our work will open up new possibilities in the development of purely metal-free photocatalysts for "green" environmental remediation applications.

Effect of UV/chlorine treatment on photophysical and photochemical properties of dissolved organic matter.

Dissolved organic matter (DOM) is a ubiquitous component in effluents, DOM discharged with an effluent can affect the composition and properties of natural DOM in the receiving waters. As the photophysical and photochemical properties of effluent DOM can be changed by wastewater treatment processes, the effect of UV/chlorine treatment on the photophysical and photochemical properties of DOM was investigated using Suwannee River fulvic acid (SRFA) and Suwannee River natural organic matter (SRNOM) as representatives. Results showed that the absorbance of the two DOM was significantly decreased. The evolution trends of three representative photophysical parameters upon increase of chlorine dosages were observed. Also, a decrease in DOM aromaticity, molecular weight and electron-donating capacity was observed upon increasing chlorine dosage. Quantum yields of excited triplet state of DOM (3DOM*), singlet oxygen (1O2) and hydroxyl radicals (·OH) first decreases and then increased in the UV/chlorine systems upon increasing chlorine dosages due to the different reaction pathways of the two DOM. Moreover, 3DOM* can not only be regarded as a "controller" of other reactive intermediates, but also effectively promote the photodegradation of bezafibrate, which is classified as a persistent organic contaminant. This study gives deep insights into effects of UV/chlorine on the photophysical and photochemical properties of DOM, and is helpful for understanding the dynamic roles of DOM in the photodegradation of micropollutants.

Generation and evaluation of anti-mouse IgG IgY as secondary antibody.

In order to evaluate the possibility of using IgY as the secondary antibody in immunoassay, specific IgY (1: 128,000) was generated by immunizing hens with mouse serum IgG purified by protein A column. IgY was extracted from egg yolk by polyethylene glycol 6000 (PEG-6000), and further purified using protein M affinity chromatography column. The purified IgY was conjugated with horseradish peroxidase (HRP) and fluorescein isothiocyanate (FITC), in that order. The reactivity of conjugated antibodies was evaluated by ELISA, Western blot and Immunofluorescence, demonstrating that the obtained IgY was able to conjugate with enzymes, react with mouse primary IgG antibody, and subsequently amplify the antigen-antibody signals in different immune reaction conditions, in a comparable secondary effect to conventional goat anti-mouse IgG antibody. The obtained conjugated antibodies showed high stability in broad pH ranges (4-10; >70%) and high thermostability at 37 °C for 84 h (>85%). Despite the need to further consider and evaluate the industrial standardization and production process, our data provided the primary evidence that conjugated IgY antibodies can be used as a secondary antibody for broad immunological analysis.

Insights into degradation pathways and toxicity changes during electro-catalytic degradation of tetracycline hydrochloride.

The removal of antibiotics has attracted much attention due to their extremely high adverse impacts on the environment. However, the potential risks of degradation intermediates are seldom reported. In this work, the influence of different factors on the electro-catalytic degradation efficiency of tetracycline hydrochloride (TCH) by the prepared carbon nanotubes/agarose/indium tin oxide (CNTs/AG/ITO) electrode was investigated. Under optimal conditions (10 wt% CNTs dosage, pH = 7), the maximum degradation efficiency for TCH (10 mg L-1) reached up to 96% within 30 min treatment with 4 V potential. Superoxide anions (•O2-) played an important role in the electro-catalytic degradation. Totally 10 degradation intermediates were identified using HPLC-MS/MS, and the degradation pathway was proposed. Toxicities of the parent antibiotic and the identified intermediates were calculated using the ECOSAR (Ecological Structure Activity Relationship) program in EPISuite, and results showed that more toxic intermediates were generated. The maximal chronic toxicity for green algae of the intermediate increased 1439.92 times. Furthermore, antimicrobial activity was further verified by disk agar biocidal tests with Escherichia coli ATCC25922 and higher biotoxicity intermediates compared with parent compounds were confirmed to be formed. Therefore, more attention should be paid on the potential risk of degradation intermediates in the treatment of wastewater containing antibiotics.

Synthesis of graphene/black phosphorus hybrid with highly stable P-C bond towards the enhancement of photocatalytic activity.

Black phosphorus (BP), a superior two-dimensional (2D) semiconductor, has attracted much attention due to its unique properties. The graphene (GR)-BP hybrid was synthesized through one pot chemical vapor transport (CVT) approach. The characterization results indicated that P atom was successfully incorporated into GR by the formation of P-C bond. Remarkably, the newly-synthesized GR-BP represented high photocatalytic activity towards 2-chlorophenol (2-CP) degradation, due to the high efficiency of charge separation and transformation caused by the direct band gap of BP and carrier mobility of GR. The removal efficiency for 2-CP reached up to 87.08% within visible light irradiation for 180 min (λ > 420 nm). The degradation rate of GR-BP hybrid for 2-CP was approximately 7.29-fold than that of BP within 30 min. In addition, the little increasing of the peak for P-O bond in GR-BP hybrid was observed after being exposed in air for 15 days, meant that the stability of BP was significantly enhanced. It was caused by the decreasing of the oxidation sites in BP due to the formation of P-C bond in hybrid. In brief, our synthetic method for GR-BP not only provides a novel route for the improvement of the stability of BP, but also constitutes an insight into the promising practical application of BP in the photocatalysis field.

Bifunctional Fusion Proteins Derived from Tumstatin and 4-1BBL for Targeted Cancer Therapy.

The therapeutic utilities of antiangiogenesis and immunotherapy have been proven in clinics, and cancer patients have benefited from respective therapy. Given that the combination of both therapeutic strategies may further improve the effectiveness, a recombinant human 4-1BBL/tumstatin fusion protein (rh4TFP) library was constructed in the present study to target both angiogenesis and T lymphocyte activation, in which the fragments of an endogenous angiogenesis inhibitor tumstatin and a T lymphocyte costimulatory 4-1BBL are coupled with different linkers. After comparison of different combinations, rh4TFP-2 was found to show a promise on potential antiangiogenic immunotherapy. On one hand, rh4TFP-2 inhibited proliferation and migration of human umbilical vein endothelial cells, exhibiting the antiangiogenic activity similar to tumstatin. On the other hand, rh4TFP-2 led to significant increase of T lymphocyte activation for the release of IL-2 and IFN-γ, showing the T lymphocyte activation by 4-1BBL. Moreover, administration of rh4TFP-2 suppressed tumor growth and prolonged survival in a B16F10 melanoma-bearing mouse model. Taken together, the present study provides a new approach of using bifunctional fusion proteins to target both angiogenesis and T lymphocyte activation for cancer therapy.

Development of Inducible CD19-CAR T Cells with a Tet-On System for Controlled Activity and Enhanced Clinical Safety.

The tetracycline regulatory system has been widely used to control the transgene expression. With this powerful tool, it might be possible to effectively control the functional activity of chimeric antigen receptor (CAR) T cells and manage the severe side effects after infusion. In this study, we developed novel inducible CD19CAR (iCAR19) T cells by incorporating a one-vector Tet-on system into the CD19CAR construct. The iCAR19 T cells showed dox-dependent cell proliferation, cytokine production, CAR expression, and strong CD19-specific cytotoxicity. After 48 h of dox induction, the relative CAR expression of induced cells was five times greater than that of uninduced cells. Twenty-four hours after dox removal, CAR expression significantly decreased by more than 60%. In cytotoxicity assays, dox-treated cells induced significantly higher specific lysis against target cells. These results suggested that the activity of iCAR19 T cells was successfully controlled by our Tet-on system, offering an enhanced safety profile while maintaining a robust anti-tumor effect. Besides, all manufacture processes of the lentiviral vectors and the T cells were conducted according to the Good Manufacturing Practice (GMP) standards for subsequent clinical translation.

Systematic Review and Meta-Analysis of the Association between Ambient Nitrogen Dioxide and Respiratory Disease in China.

Objective: This study aimed to assess the quantitative effects of short-term exposure of ambient nitrogen dioxide (NO2) on respiratory disease (RD) mortality and RD hospital admission in China through systematic review and meta-analysis. Methods: A total of 29 publications were finally selected from searches in PubMed, Web of Science, CNKI and Wanfang databases. Generic inverse variance method was used to pool effect estimates. Pooled estimates were used to represent the increased risk of RD mortality and RD hospital admission per 10 µg/m³ increase in NO2 concentration. Results: Positive correlations were found between short-term NO2 exposure and RD in China. RD mortality and RD hospital admission respectively increased by 1.4% (95% CI: 1.1%, 1.7%) and 1.0% (95% CI: 0.5%, 1.5%) per 10 µg/m³ increase in NO2 concentration. Differences were observed across geographic regions of China. The risk of RD mortality due to NO2 was higher in the southern region (1.7%) than in the north (0.7%). Conclusions: Evidence was found that short-term exposure to NO2 was associated with an increased risk of RD mortality and RD hospital admission in China and these risks were more pronounced in the southern regions of the country, due in part to a larger proportion of elderly persons with increased susceptibility to NO2 in the population compared with the north.

Caesalpinone A, a new type of gorgonane sesquiterpenoid containing an unprecedented 1,15-bridge, from the pods of Caesalpinia spinosa Kuntze.

Caesalpinone A (1), a new type of gorgonane sesquiterpenoid containing an unprecedented 1,15-bridge, along with ten known sesquiterpenoids (2-11) were isolated from the pods of Caesalpinia spinosa Kuntze (Tara). The structure of caesalpinone A was elucidated based on its 1D and 2D NMR spectra. The absolute configuration of 1 was assigned by the comparison of the experimental and calculated electronic circular dichroism spectra. Compound 1 was evaluated for the inhibitory activities against five human tumor cell lines. The sesquiterpenoids of isodaucane skeleton and caryolane skeleton were isolated from Caesalpinia genus for the first time. Compounds 5-9 were firstly reported from Tara.